|
|
|
|
|
|
RIGID DESIGN / PRECISION CONSTRUCTION |
||
|
|
|
|||||
|
Accurate construction for work head of Z-Axis. |
Positioning jig and work table with linear guides on slideways to ensure the positioning accuracy |
The wire robbin driving system for high efficient and fast wire cutting |
|
|
C N C F U N C T I O N |
|
|
Automatic center point positioning |
|
Dry run function |
|
|
Program edit: |
|
Battery backup for memory |
| (a) On-line edit (simple CAD) |
|
(MDI) manual data input | |
| (b) NC code edit (G.M. code) |
|
Start point or hold point return | |
| (c) 3B code edit |
|
Short-circuit interrupt protection & auto. stop. | |
| (d) DXF edit (CAM, graphic transferring file) |
|
Spark gap compensation | |
|
|
Forward or reverse orbital function |
|
Wire diameter compensation |
|
|
Automatic or block stop machining |
|
Cutting path compensation |
|
|
Mirror image function |
|
Cutting path display |
|
|
Coordinate rotation function |
|
C U T T I N G S A M P L E S |
|
|
|
S P E C I F I C A T I O N S |
| MACHINE UNIT: |
|
SPECIFICATIONS |
|
DW - 35 |
| Work tank (W x D x H) |
mm/inch |
940 x 530 x 580 (97.0 x 20.9 x 22.8) |
| Work table size (X x Y) |
mm/inch |
690 x 430 (27.2 x 16.9) |
| Work table travel (X x Y) |
mm/inch |
450 x 350 (17.7 x 13.8) |
| Z axis travel |
mm/inch |
400 (15.7) |
| Max. work-piece thickness |
mm/inch |
400 (15.7) |
| Max. work-piece size (W x D x H) |
mm/inch |
400 x 350 x 400 (15.7 x 13.8 x 15.7) |
| Max. work-piece weight |
kgs/lbs |
400 (880) |
| The wire bobbin travel |
mm/inch |
210 (8.3) |
| Dia. of molybdenum wire |
mm/inch |
φ0.12 ~ φ0.25 (φ0.005 ~ φ0.010) |
| External dimensions (W x D x H) |
mm/inch |
1,270 x 1,000 x 2,120 (50.0 x 39.4 x 80.7) |
| Packing dimensions (W x D x H) |
mm/inch |
1,685 x 1,155 x 2,050 (66.3 x 45.5 x 80.7) |
| Net weight |
kgs/lbs |
1,650 (3,360) |
| DIELECTRIC UNIT: |
| Capacity of dielectric fluid |
l |
40 |
| Dielectric fluid tank size (W x D x H) |
mm/inch |
500 x 400 x 340 (19.7 x 15.8 x 13.4) |
| POWER SUPPLY UNIT (GENERATOR): |
| Control axis |
X, Y (U,V) |
|
| Circuit system |
Power MOS transistor |
|
| Max. output current |
6A |
|
| Voltage select |
100Volt |
|
| IP select |
6 steps |
|
| Off time select |
10 steps |
|
| AVR (auto volatage regulator) |
Built-in |
|
| I/O device |
3.5" floppy disk drive |
|
| Display type |
14" color monitor |
|
| Graphic function |
2D / 3D display |
|
| Control system |
Open loop / stepping system (close loop / servo system) |
|
| Command system |
ABS. / Rel. |
|
| Interpolation |
Linear / Circular |
|
| Machining feed control |
Stepping const. feed 0 ~ 100 mm2/min. (Servo / const. feed) |
|
| Total AC power input |
2 KVA |
|
| Cutting speed |
60 ~ 100 mm2/min. |
|
| Best finish roughness |
1.5 m RA |
|
| Minimum movement unit |
mm/inch |
0.001 (0.00039) |
| Minimum setting unit |
mm/inch |
0.001 (0.00039) |
| Max. command value |
mm/inch |
± 999.999 (± 39.37) |
| Cutting accuracy |
mm/inch |
± 0.01 (± 0.0039) |
| External dimensions (WxDxH) |
mm/inch |
620 x 570 x 1,700 (24.4 x 22.4 x 66.9) |
| Packing dimensions (WxDxH) |
mm/inch |
775 x 730 x 1,940 (30.5 x 28.7 x 76.4) |
| Net weight |
kgs/lbs |
200 (400) |
|
|
|
|
|||
|
|
|
|
|
|
|
|
